Premolded Cable Joints

1. Medium VOLTAGE Voltage Power Cable

   The Power Cable Joints are highly reliable, factory-molded, and tested cable joints for 15 kV, 25 kV, and 35(36) kV) class distribution systems. When assembled, they provide permanent, fully shielded, fully submersible cable joints for direct burial or vault applications of solid dielectric single-core and three-core cables.

   The power cable joints are designed to meet or exceed the IEC 60502-4 standard as well as the rigid IEEE 404 standard.

   The power cable joints offer the benefits of an optimum design for electrical stress control, they are factory molded for consistent high quality and are factory tested before field installation to ensure maximum reliability. They are easy to install without special tools, and they are easy to specify for various cable types.
   
   

2. HIGH-VOLTAGE POWER CABLE JOINTS
   
   
   • Faster installation, as the molding is done in the factory, reduces on-site time. No penciling of cable insulation is required.
   • Reduced training requirements, easily learned installation procedure.
   • No costly installation Machinery is required; field molds or wrapping machines are not required. A low-cost assembly tool is available.
   • There are no special environment equipment requirements.
   • Unlimited shelf life allows for instant availability.
   • Factory-molded quality You can be sure each cable joint in the field is produced exactly per design. Each unit is molded on a microprocessor-controlled screw injection press to produce a level of quality not possible with field molding equipment or tape.
   • Factory: 100% factory tested, each unit is electrically tested in the factory to insure consistent quality.